Pocket Test Thermometer
- 1” diameter dial face
- 5” probe
- Includes protective sleeve with built-in clip
- Recalibrates for accuracy
Calibration Instructions:
Calibration on this unit should done with a cold bath at 32°F(0°C) for a more accurate calibration.
- Fill cup with ice and top off with cold water and stir for 30 seconds.
- Insert probe into cup at least 1″ deep for 15 seconds or until the temperature reading stabilizes. Keep the probe from touching the sides or bottom of the glass.
NOTE: If the thermometer settles at 32°F(0°C), there is no calibration needed. - Use pliers and adjust the calibration nut on the bottom of the dial and turn until it reads the proper temperature, 32°F(0°C).
| TMT-P1 | Quantity | Length | Width | Height | Weight | Cube |
|---|---|---|---|---|---|---|
| Selling Unit | PC | 3 | 1.13 | 8.44 | 0.1 | |
| Inner Case | 12 | 9 | 8.88 | 3.38 | 0.9 | |
| Master Case | 72 | 18.5 | 11.81 | 11.22 | 7.1 | 1.42 |
| TMT-P3 | Quantity | Length | Width | Height | Weight | Cube |
|---|---|---|---|---|---|---|
| Selling Unit | PC | 3 | 1.13 | 8.38 | 0.13 | |
| Inner Case | 12 | 9 | 9 | 3.5 | 0.9 | |
| Master Case | 144 | 27.56 | 11.81 | 14.57 | 13.65 | 2.74 |
| TMT-P2 | Quantity | Length | Width | Height | Weight | Cube |
|---|---|---|---|---|---|---|
| Selling Unit | PC | 3 | 1.25 | 8.38 | 0.1 | |
| Inner Case | 12 | 8.88 | 8.88 | 3.38 | 0.9 | |
| Master Case | 72 | 18.5 | 11.81 | 11.22 | 7.16 | 1.42 |
